Anker SOLIX Solarbank Max | 5 kW - 7 kWh

The base unit is fully plug & play: simply position the system, plug it into a socket and configure it via the app. It can be up and running within minutes.

Want to get the most out of your system? The Solarbank Max Series delivers up to 5,000 W of output power, allowing it to cover a large share of your household electricity demand directly. This helps you use more of the energy you generate yourself and reduces the amount of electricity you need to export to or draw from the grid.

To use this higher output, the system must be connected to a dedicated circuit, ensuring safe and optimal operation. A qualified electrician can easily install or verify this for you.

To use the full 5,000 W output, you need a dedicated circuit with a suitable socket. Here’s what to check. Many modern European homes may already have a suitable circuit available.

Step 1 — Identify or install a dedicated circuit

A dedicated circuit supplies only one appliance or system, making it the safest and most straightforward option for connecting your Solarbank Max.

✓ Potentially suitable dedicated circuits include:

• Washing machine
• Tumble dryer
• Garage socket
• EV charger / wallbox circuit

✗ Avoid shared circuits such as:

• Lighting circuits: not designed for this level of power
• Kitchen sockets: typically shared between multiple appliances
• Living room sockets: usually part of a shared circuit

Also check where the socket connected to the dedicated circuit is located. Suitable locations may include a utility room, garage, attic, storage room or garden building. Avoid unsuitable locations such as bathrooms or anywhere the system could obstruct access or walkways.

Step 2 — Check the circuit capacity

Check that the dedicated circuit has the appropriate circuit breaker and wiring for the required load. Have a qualified electrician verify that the circuit, cabling and protection devices comply with applicable local electrical regulations.

Step 3 — Check the socket

Where permitted for the selected installation method, use a suitable, correctly installed socket. Make sure it is in good condition, with no discolouration, loose connections or visible signs of wear.

Step 4 — Connect the system

Connect the Solarbank Max Series directly to the socket on the dedicated circuit, following Anker’s installation requirements. No extension leads or multi-socket adapters should be used.

Step 5 — Set the output power in the app

The output power is set to 800 W by default. Open the Anker app, go to the system settings and configure the permitted output power for your installation.

Five simple steps, without the need for a complex installation. Get more of your high-demand household appliances running on your own solar energy.

Installation requirements and permitted output power may vary by country. Always follow local electrical regulations and Anker’s installation instructions. We strongly recommend having a qualified electrician verify that the circuit, wiring, protection devices and connection point are suitable before operating the system at higher power levels.

Yes. Combine the Anker SOLIX Solarbank Max with the Anker SOLIX Backup Auto-Switch and the system can automatically switch to battery backup when the grid goes down. With whole-home backup, your home remains connected to the backup system, with up to 5,000 W of backup power available. Once grid power is restored, the system automatically switches back.

Yes. The Solarbank Max features a modular, expandable design. Start with 7 kWh of storage capacity and add additional battery modules later, expanding the system to a maximum of 42 kWh.

Yes. With an IP66 rating and C5-M corrosion resistance, the Solarbank Max is designed for both indoor and outdoor installation. Its active heating system enables reliable operation at temperatures down to -20°C.