Lunergy Hub 2400 AC + BP5200 | 2,4 kW - 5,12 kWh

Make better use of your own solar energy, respond more intelligently to dynamic electricity tariffs and ensure sufficient power availability in your home at the same time. The Lunergy Hub 2400 AC + BP5200 makes this possible in one modular and expandable system.

The system is fully AC-coupled and integrates with your existing solar installation without requiring modifications to your PV inverter. Using real-time P1 data, the battery detects when surplus solar energy is available and charges automatically. When household consumption increases or electricity prices rise, the stored energy is deployed. This increases self-consumption and allows you to use your generated energy more efficiently.

With 5.12 kWh of storage capacity and an output power of up to 2.4 kW, this configuration combines a practical energy buffer with genuinely usable power. Ideal for supporting base household consumption and intelligently absorbing peak demand.

800 W plug-in, expandable to 2.4 kW

When connected to the wall outlet, the Hub 2400 AC delivers up to 800 W as standard. This makes it an accessible plug-in home battery that can be deployed immediately without complex installation.

Would you like to operate the system at higher power or expand its capabilities? Connect the Hub to a dedicated circuit in your distribution board and activate the power upgrade via the app. The Lunergy Hub 2400 AC can then deliver up to 2.4 kW of continuous power, with peak output up to 4.8 kW. *

Scalable storage up to 15.36 kWh

The included BP5200 battery module provides 5.12 kWh of storage capacity and uses LiFePO4 technology. This battery chemistry is known for safety, stability and long service life. The system features a modular, stackable design. Up to three BP5200 modules can be combined, increasing total storage capacity to 15.36 kWh. This makes the Lunergy suitable for households looking to further optimize self-consumption and reserve sufficient capacity for evening use or peak demand periods.

Integrated backup power

The Hub 2400 AC also features an integrated AC off-grid output with a transfer time of less than 10 milliseconds. In the event of a power outage, essential appliances such as a refrigerator, router or heating system can remain operational. The maximum output of this port is 2.4 kW, allowing multiple critical loads to run simultaneously.

Designed for indoor and outdoor use

With an IP65 enclosure, the system is protected against dust and water splashes. Installation is possible in locations such as a garage, utility room or covered outdoor area. Active cooling keeps noise levels below 45 dB, ensuring comfortable operation even in residential environments.

With the Lunergy Hub 2400 AC + BP5200, you choose a scalable home battery system that grows with your energy needs. From simple plug-in use to installation on a dedicated circuit, the system offers flexibility without compromising on power.

* Note: For outputs above 800 W, we recommend connecting the system to a dedicated circuit that is not shared with other appliances. Have this checked or installed by a certified electrician to ensure the installation remains safe and complies with applicable regulations.