Zendure SolarFlow 2400 AC+ & 5x AB3000L | 2,4 kW - 16,8 kWh

With the Zendure SolarFlow 2400 AC+ & 5x AB3000L, you can add the maximum 16.8 kWh of storage capacity to your existing solar installation. Your current PV inverter remains in place, while surplus solar energy is automatically stored and used when your home needs it. With this maximum configuration, you have plenty of capacity to store more of your own solar energy for later and draw less electricity from the grid.

Maximum 16.8 kWh storage capacity

The SolarFlow 2400 AC+'s integrated 2.4 kWh battery is combined with five 2.88 kWh AB3000L batteries, providing a total of 16.8 kWh of storage capacity. This gives you the maximum battery capacity supported by a single SolarFlow 2400 AC+ system.

With 16.8 kWh of storage capacity, you are less likely to have to choose between using your solar energy immediately or feeding it back into the grid. The maximum storage capacity gives you plenty of room to capture larger energy surpluses during the day and save that energy for times when your solar panels generate little or no electricity. This allows you to use your available solar energy much more flexibly throughout the day and get the most out of a single SolarFlow 2400 AC+ system.

The SolarFlow 2400 AC+ is integrated on the AC side of your existing solar installation. Your solar panels therefore continue to operate through your current PV inverter, without requiring major changes to your existing system.

Smart energy management with Zendure HEMS

Combined with a smart energy meter, Zendure HEMS continuously monitors how much energy your home consumes. The system automatically adjusts charging and discharging accordingly, storing surplus solar energy and making it available again when your home needs it. Dynamic electricity prices can also be taken into account, allowing the battery to charge when electricity prices are low, for example.

The Zendure app gives you insight into the battery's state of charge, household energy consumption and energy flows throughout your home.

Up to 2400 W of power

The stored energy can then be used to power your home. Via a power socket, the SolarFlow 2400 AC+ delivers up to 800 W by default. After installation on a suitable dedicated circuit and inspection by a qualified installer, the output can be increased to 2400 W via the Zendure app, making more stored energy available when your home needs it.